Plate Actuator 1 (CMAP01)
Noliac Plate Actuators
Noliac CMAP's are typically used when a low displacement at high force is required. Noliac CMAP's are cofired monolithic piezoelectric low voltage actuators that convert an electrical input to a very high-resolution linear movement at high force.
Noliac CMAP's are manufactured with ceramic layer thickness down to 20 µm as standard in order to allow very low operating voltage for full performance of the piezo material. Noliac CMA's are mostly made to customer specifications, but a wide range of parts is available from stock as well.
Product facts:
| Value | Tolerance | |
|---|---|---|
| Length/outer diameter | 3 mm | ± 0.10 mm |
| Width/inner diameter | 3 mm | ± 0.10 mm |
| Height | 2 mm | ± 0.05 mm |
| Operating voltage | 60 V | |
| Free stroke | 2.6 µm | ± 15% |
| Blocking force | 360 N | ± 20% |
| Capacitance | 500 nF | ± 15% |
| Stiffness | 138 N/µm | ± 20% |
| Maximum operating temperature | 125 °C | |
| Curie temperature | 235 °C | |
| Material | NCE59 (S2) | |
| Unload resonance frequency | > 500 kHz | |
| External electrodes | Screen-printed Ag | |
| Wires | Optional |
Typical outline:
The figure below shows typical outline of CMAP's
| Symbol | Parameter | Unit |
|---|---|---|
| L | Length excluding external electrodes | mm |
| W | Width | mm |
| H | Height | mm |
