Plate Stack Actuator 7 (SCMAP07)

Noliac Plate Stacks

Noliac SCMAP's are typically used when a medium displacement at high force is required. Noliac SCMA's are stacks of cofired monolithic piezoelectric low voltage actuators that convert an electrical input to a very high-resolution linear movement at high force.

Noliac CMAP's are manufactured with ceramic layer thickness down to 20 µm as standard in order to allow very low operating voltage for full performance of the piezo material. Noliac SCMAP's are mostly made to customer specifications, but a wide range of parts is available from stock as well.

Product facts:

ValueTolerance
Length/outer diameter 5 mm +0.3/-0.1 mm
Width/inner diameter 5 mm +0.3/-0.1 mm
Width max/ Outer diameter max
(including bus wire and solder material, no wire)
6.8 mm max
Height
(see table below)
4 - 50 mm +/-0.2 mm or +/-1%*
Operating voltage 200 V
Free stroke 2.9 - 71 µm +/-15%
Blocking force 1000 N +/-20%
Capacitance 100 - 2300 nF +/-15%
Stiffness 323 - 14 N/µm +/-20%
Maximum operating temperature 150 °C
Curie temperature 350 °C
Material NCE57 (S1)
Unloaded resonance frequency >250 kHz -> 22 kHz
External electrodes Ag/Pd
Wires 28 AWG x 200 mm (+/-20 mm) Teflon

* Whichever is largest

Stack options:

HeightStrokeCapacitance
4 mm 2.9 µm 95 nF
6 mm 5.9 µm 190 nF
8 mm 8.8 µm 280 nF
10 mm 11.8 µm 380 nF
12 mm 14.7 µm 480 nF
14 mm 17.7 µm 570 nF
16 mm 20.6 µm 660 nF
18 mm 23.6 µm 760 nF
20 mm 26.5 µm 860 nF
22 mm 29.4 µm 950 nF
24 mm 32.4 µm 1050 nF
26 mm 35.3 µm 1150 nF
28 mm 38.3 µm 1250 nF
30 mm 41.2 µm 1300 nF
32 mm 44.2 µm 1400 nF
34 mm 47.1 µm 1500 nF
36 mm 50.1 µm 1600 nF
38 mm 53 µm 1700 nF
40 mm 56 µm 1800 nF
42 mm 58.9 µm 1900 nF
44 mm 61.8 µm 2000 nF
46 mm 64.8 µm 2100 nF
48 mm 67.7 µm 2200 nF
50 mm 70.7 µm 2300 nF

Please, specify height when asking for a quote

Typical outline:

The figure below shows typical outline of SCMAP's

SCMA-P

SymbolParameterUnit
L Length mm
W Width mm
WM Width max (including bus wire and solder material, no wire) mm
H Height mm
All technical information of this document is not contractual and can be changed without prior notice.
 
More Information