Micromechatronics, Inc. (MMech)

www.mmech.com - Ph: 814-861-5688

AE0505D08H09 (T=5mm x W=5mm x H=9mm)

KEMET-TOKIN - Resin Coated Multilayer Piezoelectric Actuators

AE0x0xH0xD0xF med

AE0505D08H09F - Thick Coating

1-9 units: $95.00

10-24 units: $85.00

25-50 units: $74.50

>50 units: Request a quote

ae0505D08H09df med4

AE0505D08H09DF -Thin Coating

1-9 units: $95.00

10-24 units: $85.00

25-50 units: $74.50

>50 units: Request a quote

pdf-icon_sm Spec Sheet for AE0505D08H09DF

Step sm STEP File for AE0505D08H09DF

Specifications

ItemStandardConditions>
Operating temperature range -25 to +85°C
When applied with a DC voltage: Ambient temperature
When driven by an AC voltage: Ambient temperature + Temperature rise due to generated heat
Recommended Storage Condition -5 to +40°C / less than 40% R.H. Recommended storage to be at room temperature. No condensation
Maximum driving voltage 150V DC  
Displacement 8.7±1.5µm At 150V DC
Blocked Force 850 N Force required for restricting the displacement to 0 when the maximum driving voltage is applied.
Capacitance 0.68 µF ± 20%
f = 1 kHz, V = 1 Vrms (< 10 µF)
f = 120 Hz, V = 1 Vrms (> 10 µF)
Dissipation Factor 5% or less  
Insulation Resistance 10.0 MOhm Value obtained in 1 minute at 150V DC
Resonance Frequency 152 kHz With both ends of the actuator in free state.
Tensile strength 1/10 of generated force Typical value of the element under standard factory test conditions
Young's Modulus 4.4x1010 N/m2 Typical value of the element under standard factory tests conditions
Temperature Cycle Test
Displacement: Initial value ± 20%
Capacitance: Initial value ± 30%
Tan Delta: Less than initial rated value
Insulation resistance: 1MOhm or more
Apperance: No noticeable defect
Room temperature (3 min)
-25°C (30 min)
Room temperature (3 min)
+85°C (30 min)
Repetition of 10 cycles of the above

Outer Dimensions

AE050508F Outter Dimensions - 235x250

AE0505D08H09F

T1 = 5±0.1 mm
W1 = 5±0.1 mm
H = 9±0.1 mm
T2 = 6.5 mm max.
W2 = 6.5 mm max.
Wire length = 100mm

AE0505D08H09DF

T1 = 5±0.1 mm
W1 = 5±0.1 mm
H = 9±0.1 mm
T2 = 5.4 mm max.
W2 = 5.4 mm max.
Wire length = 100mm

Wire Dimmensions

Wire Diameter
d = 0.3 mm
D = 0.5 mm
Length of wire: 100 mm
AWG: 30
UL number: 1993
Factory-shipped polarization:
RED lead wire = (+) POSITIVE
BLACK lead wire = (-) NEGATIVE
Wire: Copper wire with Tin plating
Coating: PTFE (Polytetrafluoroethylene)

More Information

101 Innovation Blvd. Suite 308
State College, PA 16803, USA
Ph: (814)-861-5688
contact@mmech.com
MMechLogosm