Micromechatronics, Inc. (MMech)

www.mmech.com - Ph: 814-861-5688

 TOKIN - Resin Coated Multilayer Piezoelectric Actuators

AE0707D16 (T=7mm x W=7mm x H=20mm)

AE0505D16

AE0707D16F-Thick Coating

1-4 units: $395.00

5-9 units: $355.00

10-24 units: $245.00

25-50 units: $210.00

>50 units: Request a quote

MOQ=2 units

AE0707D16DF-Thin Coating

1-4 units: $395.00

5-9 units: $355.00

10-24 units: $245.00

25-50 units: $210.00

>50 units: Requesta quote

MOQ=2 units

Specifications

Item
Standard
Conditions
Operating temperature range
-25 to +85°C
When applied with a DC voltage: Ambient temperature
When driven by an AC voltage: Ambient temperature + Temperature rise due to generated heat
Recommended Storage condition
-5 to +40°C / less than 40% R.H. Recommended storage at room temperature. No condensation
Maximum driving voltage 150V DC  
Displacement
17.4±2.0µm At 150V DC
Blocking force 1700 N Force required for restricting the displacement to 0 when the maximum driving voltage is applied.
Capacitance 3.4 µF ± 20% f = 1kHz; V=1Vrms
Dissipation Factor
< 5.0% f = 1kHz; V=1Vrms
Insulation Resistance
5 MOhm Value obtained in 1 minute at 150V DC
Resonance Frequency
69 kHz With both ends of the actuator in free state.
Tensile strength 1/10 of generated force Typical value of the element under standard factory tests conditions
Young's Modulus
4.4x1010 N/m2 Typical value of the element under standard factory tests conditions
Temperature Cycle Test
Displacement: Initial value ± 20%
Capacitance: Initial value ± 30%
Tan Delta: Less than initial rated value
Insulation resistance: 1MOhm or more
Apperance: No noticeable defect
Room temperature (3 min)
-25°C (30 min)
Room temperature (3 min)
+85°C (30 min)
Repetition of 10 cycles of the above

Outer Dimensions

AE050508F Outter Dimensions - 235x250

 

Model: AE0707D16F

 

T1 = 7±0.1 mm

 

W1 = 7±0.1 mm

 

H = 20±0.1 mm

 

T2 = 8.5 mm max.

 

W2 = 8.5 mm max.

 

Wire length = 100mm

 

Model: AE0707D16DF

 

T1 = 7±0.1 mm

 

W1 = 7±0.1 mm

 

H = 20±0.1 mm

 

T2 = 7.4 mm max.

 

W2 = 7.4 mm max.

 

Wire length = 100mm

Wire Dimmensions

Wire Diameter

d = 0.5 mm

D = 0.8 mm

Length of wire: 100 mm

AWG: 26

UL number: 1993

Factory-shipped polarization:

RED lead wire = (+) POSITIVE

WHITE lead wire = (-) NEGATIVE

Wire: Copper wire with Tin plating

Coating: PTFE (Polytetrafluoroethylene)

 

 

More Information

101 Innovation Blvd. Suite 308
State College, PA 16803, USA
Ph: (814)-861-5688
contact@mmech.com
MMechLogosm