Micromechatronics, Inc. (MMech)

www.mmech.com - Ph: 814-861-5688

NAC2227

Plate Bender NAC2227 (replaces CMBP07)

Noliac/CTS Plate Bender

Noliac NAC222X's are typically used when a large displacement at low force is required. Noliac NAC222X's are cofired monolithic piezoelectric low voltage actuators that convert an electrical input to a very high-resolution bending movement at one end of a plate shaped actuator.

Noliac NAC222X's are manufactured with ceramic layer thickness down to 67µm as standard in order to facilitate very low operating voltage for full performance of the piezo material. A wide range of NAC222X bender actuators are available from stock.

Product Specifications:

NAC2227ValueTolerance
Length/outer diameter 50.0 mm ± 1.00 mm
Width/inner diameter 7.8 mm ± 0.15 mm
Height 0.7 mm ± 0.10 mm
Operating voltage (*) 200 V (*)  
Free stroke +/- 1490 µm ± 15%
Blocking force 0.51 N ± 20%
Capacitance 2 x 300 nF ± 15%
Large Signal Axial Stiffness, typ 0.3 N/mm  
Maximum operating temperature 150 °C  
Curie temperature 350 °C  
Material NCE57 (S1)  
Unload resonance frequency 130 Hz  
External electrodes Ag  
Wires 30 AWG x 200 mm (+/-20 mm) Teflon  

(*) Operating voltage is 200V (+/- 100V)

pdf-icon_smNAC2227 Data Sheet

Typical outline:

The figure below shows typical outline of CMBP's

CMBP-01_dwg_med

SymbolParameterUnit
L Length excluding external electrodes mm
Lc Clamping length = 3.5 mm
W Width mm
H Height mm

All technical information of this document is not contractual and can be changed without prior notice.