Micromechatronics, Inc. (MMech)

www.mmech.com - Ph: 814-861-5688

NAC2013-Hxx (Replaces SCMAP04 & 07)

Noliac Plate Actuator Stack

NAC2013 is one of Noliac's plate actuators, which can be stacked according to customers' needs. Noliac's plate stacks are typically used when a medium displacement at high force is required. Noliac's plate stacks are stacks of cofired monolithic piezoelectric low voltage actuators that convert an electrical input to a very high-resolution linear movement at high force.

Noliac's plates are manufactured with ceramic layer thickness down to 20 µm as standard in order to allow very low operating voltage for full performance of the piezo material. Noliac's plate stacks are mostly made to customer specifications, but a wide range of parts is available from stock as well.

pdf-icon_smNAC2013-Hxx Data Sheet

Product facts:

NAC2013-HxxValueTolerance
Length/outer diameter 5 mm +0.3/-0.1 mm
Width/inner diameter 5 mm +0.3/-0.1 mm
Width max/ Outer diameter max
(including bus wire and solder material, no wire)
6.8 mm max
Height
(see table below)
4 - 50 mm +/-0.2 mm or +/-1%*
Operating voltage 150 V  
Free stroke 3.3 - 79.2 µm +/-15%
Blocking force 1050 N +/-20%
Capacitance 180 - 4330 nF +/-15%
Stiffness 318 - 13 N/µm +/-20%
Maximum operating temperature 150 °C  
Curie temperature 340 °C  
Material NCE51F  
Unloaded resonance frequency >248 kHz -> 22 kHz  
External electrodes Ag  
Wires 28 AWG x 200 mm (+/-20 mm) Teflon  

* Whichever is largest

Stack options:

 
HeightStrokeCapacitance
4 mm 3.3 µm 180 nF
6 mm 6.6 µm 360 nF
8 mm 9.9 µm 540 nF
10 mm 13.2 µm 720 nF
12 mm 16.5 µm 900 nF
14 mm 19.8 µm 1080 nF
16 mm 23.1 µm 1260 nF
18 mm 26.4 µm 1440 nF
20 mm 29.7 µm 1620 nF
22 mm 33 µm 1810 nF
24 mm 36.3 µm 1990 nF
26 mm 39.6 µm 2170 nF
28 mm 42.9 µm 2350 nF
30 mm 46.2 µm 2530 nF
32 mm 49.5 µm 2710 nF
34 mm 52.8 µm 2890 nF
36 mm 56.1 µm 3070 nF
38 mm 59.4 µm 3250 nF
40 mm 62.7 µm 3430 nF
42 mm 66.0 µm 3610 nF
44 mm 69.3 µm 3790 nF
46 mm 72.6 µm 3970 nF
48 mm 75.9 µm 4150 nF
50 mm 79.2 µm 4330 nF

 

Please, specify height when asking for a quote

Typical outline:

The figure below shows the typical outline of NAC Plate Actuator Stacks.

NAC20xx_Dim_med

SymbolParameterUnit
L Length mm
W Width mm
WM Width max (including bus wire and solder material, no wire) mm
H Height mm

All technical information of this document is not contractual and can be changed without prior notice.