Micromechatronics, Inc. (MMech)

www.mmech.com - Ph: 814-861-5688

NEC/TOKIN - Epoxy Acryl Coated Multilayer Piezoelectric Actuators

AE035035D08H09 (3.5mm x 3.5mm x 9mm)

ae035035d08h09df

AE035035D8H09DF -Thin Coating

1-9 units: $65.00

10-24 units: $58.00

25-50 units: $47.50

>50 units: Request a quote

Specifications

Item
Standard
Conditions
Operating temperature range
-25 to +85°C
When applied with a DC voltage: Ambient temperature
When driven by an AC voltage: Ambient temperature + Temperature rise due to generated heat
Recommended Storage condition -5 to +40°C / less than 40% R.H.
Recommended storage at room temperature. No condensation
Maximum driving voltage 150V DC
Displacement
8.5±1.5µm At 150V DC
Blocking force 410 N
Force required for restricting the displacement to 0 when the maximum driving voltage is applied.
Capacitance 0.33 µF ± 20%
f = 1kHz; V=1Vrms(<10uf)
f = 120Hz; V=1Vrms (>10uf)
Dissipation Factor
5.0% or less
f = 1kHz; V=1Vrms (<10uf)
f = 120Hz; V=1Vrms (>10uf)
Insulation Resistance
TBD MOhm
Value obtained in 1 minute at 150V DC
Resonance Frequency
152 kHz
With both ends of the actuator in free state under standard factory conditions.
Tensile strength 1/10 of generated force Typical value of the element under standard factory tests conditions
Young's Modulus
4.4x1010 N/m2
Typical value of the element under standard factory tests conditions
Temperature Cycle Test
Displacement: Initial value ± 20%
Capacitance: Initial value ± 30%
Tan Delta: Less than initial rated value
Insulation resistance: 1MOhm or more
Apperance: No noticeable defect
Room temperature (3 min)
-25°C (30 min)
Room temperature (3 min)
+85°C (30 min)
Repetition of 10 cycles of the above

Outer Dimensions

AE_Dimen_tall_med

Model: AE035035D08H09DF

Thin Coating

T1 = 3.5±0.1 mm

W1 = 3.5±0.1 mm

H = 9±0.1 mm

T2 = 3.9 mm max.

W2 = 3.9 mm max.

Wire length = 100mm

Wire Dimmensions

Wire Diameter

d = 0.3 mm

D = 0.5 mm

Length of wire: 100 mm

AWG: 30

UL number: 1993

Factory-shipped polarization:

RED lead wire = (+) POSITIVE

BLACK lead wire = (-) NEGATIVE

Wire: Copper wire with Tin plating

Coating: PTFE (Polytetrafluoroethylene)

 

 

More Information

200 Innovation Blvd. Suite 155
State College, PA 16803, USA
Ph: (814)-861-5688
Fax: (814)-861-1418
contact@mmech.com
MMechLogosm