Plate Bender NAC2228 (replaces CMBP08)
Noliac/CTS Plate Bender
Noliac NAC222X's are typically used when a large displacement at low force is required. Noliac NAC222X's are cofired monolithic piezoelectric low voltage actuators that convert an electrical input to a very high-resolution bending movement at one end of a plate shaped actuator.
Noliac NAC222X's are manufactured with ceramic layer thickness down to 67µm as standard in order to facilitate very low operating voltage for full performance of the piezo material. A wide range of NAC222X bender actuators are available from stock.
|Length/outer diameter||50.0 mm||± 1.00 mm|
|Width/inner diameter||7.8 mm||± 0.15 mm|
|Height||1.3 mm||± 0.10 mm|
|Operating voltage (*)||200 V (*)|
|Free stroke||+/- 1000 µm||± 15%|
|Blocking force||1.90 N||± 20%|
|Capacitance||2 x 600 nF||± 15%|
|Large Signal Axial Stiffness, typ||1.9 N/mm||± 20%|
|Maximum operating temperature||150 °C|
|Curie temperature||350 °C|
|Unload resonance frequency||230 Hz|
|Wires||28 AWG x 200 mm (+/-20 mm) Teflon|
(*) Operating voltage is 200V (+/- 100V)
The figure below shows typical outline of CMBP's
|L||Length excluding external electrodes||mm|
|Lc||Clamping length = 3.5||mm|
All technical information of this document is not contractual and can be changed without prior notice.